Tuesday, 13 August 2019

internet - Is it possible for a router to "go bad" with time?


I've been having problems with my internet connection over the past weeks (intermittent disconnections, slow transfers, etc), and my provider keeps telling me that the problem is not on their end.


I have cablemodem with a wifi router (this router was not provided by them).


The router is quite old (DIR-300), so I'm starting to wonder if it could be the issue and if I should replace it.


Is it possible that it is the cause? Can they become so outdated that they cause intermittent interruptions of service?


If I reset the modem and the router, they work fine for a few hours, but the problems starts again after a while.



Answer



Yes.


In general, routers can and do fail. The primary cause of failure for consumer grade equipment is heat stress. Most consumer grade hardware runs far too hot and have respectively poor air cirulation compared to their ventilation needs.


Long-term exposure to heat causes various components to degrade/fail and manifests itself as "intermittent" problems. In general, consumer grade hardware is not as robustly made as commercial or enterprise hardware. But all physical devices are subject to physical effects.


It's not uncommon for consumer grade devices to fail within a few years due to heat or vibration issues. Routers stuck near windows (argh! the sun!), placed on the floor (dust!), or jammed into a bookcase (no air flow) are especially prone to failures. Contrast that with commercial grade devices which are often still working for 10 or more years after their first deployment.


Most cable modems have either an ethernet port or WiFi ability. To isolate the cause of your network problems, you should consider bypassing your router and plugging your PC/laptop directly into the cable modem to see if whether or not you experience the same problems.


Of course, bypassing the router means you bypass the router's firewall protection and NAT abilities so take due precautions on your computer.


No comments:

Post a Comment

How can I VLOOKUP in multiple Excel documents?

I am trying to VLOOKUP reference data with around 400 seperate Excel files. Is it possible to do this in a quick way rather than doing it m...